Product Detail
Cutting Underlay Gerber Cutter DCS 2500 Series
We offer different cutting underlays starting from thickness 2.5mm - 5.5mm (green / grey / black). Protecting tools and cutter surface. From the roll or cut to size if needed. Some are available as endless rolls with a with of 160 cm or 150 / 120 /105 cm x 100meter length. This can save you lots from cutting to shipping cost.
1. Cutting, wear, puncture and skid-resistant, soft surface, no damage to the conveyed items;
2. The felt is tight and firm, and the surface does not shed or scrape;
3. High tensile force and low elongation, which effectively improves the phenomenon of belt loss due to elongation and reduces the conveying efficiency;
4. Good air permeability and excellent flexibility.
Additional Information
The pulley diameters are valid for a hot spliced belt and at the indicated belt force. Depending on the splice and working conditions (e.g.temperature), different pulley diameters may be possible or necessary. When fasteners are used the minimum diameters are increased by approx 50%. Consult our specialists for available profiles and accessories.
Product Application
top of page

bottom of page