Choosing a Cutting Underlay for Esko In Signage Production
If your signage business uses an Esko Kongsberg cutting table, you probably work with a variety of materials every day, from foam boards and printed cardboard to retail displays and advertising graphics.
After months of regular use, you may start noticing deeper blade marks on the cutting underlay, uneven cuts, or areas where the blade no longer cuts cleanly through the material.
These problems aren't always caused by the cutting machine. Sometimes, the underlay beneath your material is simply worn out.
Choosing the right replacement can help keep your cutting table working consistently and reduce unnecessary interruptions.

Why Does the Cutting Underlay Matter in Signage Production?
A cutting underlay sits beneath the material you're cutting. It supports the workpiece and provides a protective surface for the blade during through-cutting.
For signage companies, this is particularly important when working with foam boards, corrugated cardboard, and other advertising display materials.
As the underlay wears down, several problems can begin to appear.
Uneven Cuts or Materials That Don't Cut All the Way Through
Have you ever finished a cutting job only to find that some sections are still attached?
This can happen when the underlay has become uneven or developed deep grooves after repeated cutting.
A fresh SCplus felt cutting underlay provides a more even supporting surface. When your blade depth and machine settings are correct, this can help maintain more consistent cuts across the table.
Deep Blade Marks on the Cutting Surface
It's normal for a cutting underlay to develop blade marks over time. After all, it's designed to take the wear instead of the machine's underlying table.
The problem starts when those marks become deep enough to affect the cutting surface.
Replacing the worn underlay helps restore a more uniform surface and protects the table during compatible knife-cutting operations.
Materials Moving During Cutting
When cutting printed signs or display graphics, even a small movement can affect the finished result.
The cutting underlay is one part of the setup that may influence how well materials stay in place.
For vacuum cutting tables, the underlay needs to work with the machine's hold-down system. SCplus can supply suitable felt constructions for compatible applications.
Keep in mind that material movement can also be caused by low vacuum pressure, incorrect cutting settings, or tool problems. Replacing the underlay alone may not solve every issue.
Is a Thicker Cutting Underlay Better?
Not necessarily.
A thicker underlay doesn't automatically give you cleaner cuts or last longer. What matters is whether it matches your machine's requirements.
For example, some Kongsberg cutting tables use a 3 mm felt underlay. That doesn't mean you can simply replace it with a 5 mm underlay without checking the machine setup.
If you're happy with how your original underlay performed, choosing the same thickness and material is usually a good starting point.
If you're not sure what to order, send us the specifications of your existing underlay. We can help you check the available options.
How to Choose a Cutting Underlay for Signage Production
Signage companies often use Esko cutting tables to produce foam board signs, printed displays, promotional stands, and other advertising materials. Choosing the right cutting underlay depends on the materials you cut and the cutting quality you need.
1. Choose a Suitable Surface for Your Materials
For foam boards, corrugated displays, and printed cardboard, a felt cutting underlay provides support during knife cutting. Look for a smooth, even surface that can handle repeated blade contact without developing excessive grooves too quickly.
2. Consider Cutting Accuracy and Material Hold-Down
Clean edges and accurate shapes are important when producing printed signs and display graphics. A suitable underlay helps maintain consistent cutting depth. If your Esko table uses vacuum hold-down, make sure the felt construction is compatible with its airflow requirements.
3. Match the Thickness to Your Cutting Table
SCplus offers felt cutting underlays in 2.5, 3.0, 4.0, 5.0, and 5.5 mm thicknesses. The best choice depends on your existing underlay and machine setup. We recommend checking the original thickness before selecting a replacement.
Need a cutting underlay for your signage production? Tell SCplus what advertising materials you cut and share your Esko machine model. Our engineers can help you find a suitable felt underlay or customize one for your requirements.
When Is It Time to Replace Your Cutting Underlay?
You don't need to replace your underlay just because it has a few blade marks. Some wear is expected.
However, you should take a closer look if:
Deep grooves have developed in frequently used areas.
The surface feels uneven or compressed.
The edges are damaged or lifting.
Cutting depth has become inconsistent.
You've checked the blade and machine settings, but cutting problems continue.
If the underlay is worn out, replacing it is often more practical than repeatedly adjusting the cutting depth to compensate.
After installation, remember to check the table reference and cutting settings according to your machine's instructions.
Replacement Cutting Underlays for Esko Machines from SCplus
SCplus manufactures felt cutting underlays for digital cutting equipment, including replacement solutions for Esko Kongsberg cutting tables.
We offer standard thicknesses as well as custom dimensions for customers who need a specific size or material construction.
Whether you're replacing a worn underlay or looking for an alternative supplier, our engineers can help you review the requirements of your cutting machine.
You don't need to know every technical detail before contacting us. Simply send us:
Your Esko Kongsberg machine model
The size and thickness of your current underlay
The materials you normally cut
A photo of your existing underlay, if available
We'll review the information and help you find a suitable replacement or discuss a customized solution.
Need a replacement cutting underlay? Contact SCplus for product details and a quotation.





Comments