What to pay attention to when using high temperature resistant felt conveyor belts
High temperature resistant conveyor belts are more commonly used in the industrial industry and are available in silicone, Teflon, felt, etc. Different materials are used in different environments, customized and processed according to the needs. It is a conveyor belt with a soft surface for high temperature resistant felt conveyor belts. It is divided into double-sided felt and single-sided felt and is generally used to convey precision instruments, glass, or relatively complex objects. It has relatively high-temperature resistance and is used in many industries, but some problems need attention in the process of use.
1. When the hightemperature resistant felt conveyor belt is operating, ensure no one is in the main conveyor for repair and maintenance.
2. Start to pay attention to the reducer and the motor ringing is not all normal; vibration is not strong, the motor reducer, roller shaft, and shaft coupling temperature is not too high, conveyor chain buckle is not smooth.
3. When the high temperature felt conveyor belt is terminated or the termination data signal comes in from the back, terminate immediately. It is forbidden to operate with no load for a long time. If the load is too large, the conveyor belt will not be able to convey the high temperature resistant felt conveyor belt, it should be shut down immediately, and the continuous starting should not exceed three times. Each time the starting time should be at most 15 seconds.
4. If the high temperature felt conveyor belt is too loose in the application process, it is very easy to run off and fall down, negatively impacting the manufacturing and conveying. Only moderate tension can make the transportation go smoothly. However, it must be noted that the tension of high-temperature felt conveyor belt should be manageable. Too high pressure will lead to the jamming condition.
5. high temperature resistant felt conveyor belt in the application process, pay attention to the large raw materials or hard blocks transported with the raw materials, found to immediately remove, scratch felt transport harm manufacturing; often clear the goods around the top of the conveyor belt head to prevent buried motor, endangering heat pipe heat dissipation and all normal transport.
In general, we pay more attention to the details of the conveyor belt. After all, in the process of work, sometimes there may be some failure problems, these problems need to do a good job of timely inspection and repair work, so as to make the conveyor belt durable. If you need conveyor belts, you can consult our business.
Comentarios